Vertex Standard VX-800 Spécifications télécharger pdf (Page 114)

VX-3R OPERATING MANUAL112

Set Mode Item 30

[

EAI

]

Function: Enables/Disables the Emergency Automatic ID (EAI) feature..

Available Values: ON/OFF

Default: OFF

Set Mode Item 31

[

EAI.TMR

]

Function: Sets the Emergency Automatic ID (EAI) operating mode and its Transmit Time.

Available Values:

INT. 1M through INT.10M, INT.15M, INT.20M, INT.30M, INT.40M, INT. 50M,

CON. 1M through CON.10M, CON.15M, CON.20M, CON.30M, CON.40M, and CON.

50M

Default: CON. 5M

Set Mode Item 32

[

EMG.SEL

]

Function: Select the alarms utilized when the Emergency function is engaged.

Available Values: BEEP/STROBE/BP+STR/BEAM/BP+BEM/CW/BP+CW/CWT

Default: BP+STR

BEEP (BP): Loud “Alarm” sounds.

STROBE (STB): Flashes the TX/BUSY indicator in bright white color.

BP+STB: Loud “Alarm” sounds along with flashing of the TX/BUSY indicator in

white.

BEAM: The TX/BUSY indicator glows continuously in white.

BP+BEM: Loud “Alarm” sounds and the TX/BUSY indicator glows continuously

in white.

CW: The TX/BUSY indicator flashes according to the programmed Emer-

gency message (Morse Code)

at a rate of five words per minute.

BP+CW: Sounds tones via the speaker, and flashes the TX/BUSY indicator, ac-

cording to the programmed Emergency message (Morse Code)

at a rate

of five words per minute.

CWT: Transmits the programmed Emergency message (Morse Code)* and

flashes the TX/BUSY indicator, according to the programmed Emer-

gency message (Morse Code)

on the air beginning one minute after

activation of the Emergency function.

: The internationally-recognized Morse Code “S.O.S” message (

• • •

– – –

• • •

) is pro-

grammed at the factory for the Emergency message.

Here’s how to program the Emergency Message:

1. Set this Set Mode Item to “

CWCW

CW” or “

BP+CWBP+CW

BP+CW.”

2. Press the

[

V/M

]

key to display any previously-stored emergency message.

3. Press the

[

HM/RV

]

key to clear any previous emergency message, if desired.

4. Rotate the DIAL knob to select the first letter/number of the message, then press the

[

V/M

]

key momentarily to save the first letter/number and move on to the next character.

SET

(

)

ODE

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 131 132

Commentaires sur ces manuels

Pas de commentaire

Vertex Standard VX-800 Spécifications Page 114

Commentaires sur ces manuels

Produits connexes et manuels pour Radios Vertex Standard VX-800