Vertex Standard VX-800 Spécifications télécharger pdf (Page 87)

VX-3R OPERATING MANUAL 85

Despite the lack of a DTMF keypad, you can still transmit DTMF tones with the VX-3R

for repeater control or autopatch use.

MANUAL DTMF TONE GENERATION

1. Press and hold the

[

TXPO

]

key for one second to enter the Set mode.

2. Rotate the DIAL knob to select Set Mode Item 26:

DT ADT A

DT A/

Note: Do not forget to pull the DIAL knob to rotate the DIAL

knob.

3. Press the

[

TXPO

]

key to enable adjustment of this Set Mode

Item.

4. Rotate the DIAL knob to select “

MANUALMANUAL

MANUAL.”

5. Press the PTT switch to return to normal display.

6. Hold the PTT switch in to continue transmitting during the following steps.

A. Press the

[

TXPO

]

key momentarily.

B. Rotate the DIAL knob to select the number to be sent, and

then press the

[

TXPO

]

key momentarily to send the number.

C. Repeat step B as many times as needed until you have com-

pleted the number string.

D. Release the PTT switch.

The DTMF “

¼¼

¼” code is displayed as “E,” and the DTMF code “#” is dis-

played as “F” on the display.

DTMF AUTODIALER

10 DTMF Autodial memories are provided, allowing you to store telephone numbers for

autopatch use. You can also store short autopatch or Internet-link access code streams to

avoid having to send them manually.

Here is the DTMF Autodial storage procedure:

1. Press and hold in the

[

TXPO

]

key for one second to enter the Set mode.

2. Rotate the DIAL knob to select Set Mode Item 28:

DT SELDT SEL

DT SEL.

Note: Do not forget to pull the DIAL knob to rotate the DIAL

knob.

3. Press the

[

TXPO

]

key to enable adjustment of this Set Mode

Item.

4. Rotate the DIAL knob to select the DTMF Memory register

(“

CH0CH0

CH0” - “

CH9CH9

CH9”) into which you wish to store this DTMF string.

5. Press the

[

V/M

]

key to begin DTMF Memory entry into the se-

lected register. The first digit location will blink.

6. Press and hold the

[

HM/RV

]

key for 2 seconds to clear any pre-

DTMF OPERATION

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 131 132

Commentaires sur ces manuels

Pas de commentaire

Vertex Standard VX-800 Spécifications Page 87

Commentaires sur ces manuels

Produits connexes et manuels pour Radios Vertex Standard VX-800